NTE1358 Integrated Circuit Module, AF PO, 50W, Dual Power Supply
Absolute Maximum Ratings: (TA = +25C unless otherwise specified) Maximum Supply Voltage, VCCmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53V Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30 to +105C Thermal Resistance, Junction-to-Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8C/W Available Time for Load Shorted (VCC = 36V, RL = 8, f = 50Hz, PO = 50W), ts . . . . . . . . . . . 2sec Recommended Operating Conditions: (TA = +25C unless otherwise specified) Recommended Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23V Load Resistance, RL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Electrical Characteristics: (TA = +25C, VCC = 36V, RL = 8 (Non-Inductive Load), Rg = 600, VG = 26.3dB unless otherwise specified)
Parameter Quiescent Current Output Power Symbol ICCO PO THD RE VCC = 43V THD = 0.02%, f = 20Hz to 20kHz VCC = 31V, THD = 0.03%, f = 1kHz, RL = 4 Total Harmonic Distortion Emitter Resistance PO = 1 to 50W, f = 20Hz to 20kHz Test Conditions Min 20 50 55 - 0.18 Typ 40 - - - 0.22 Max 80 - - 0.02 0.30 Unit mA W W %
Note 1. For power supply at the time of test, use a constant-voltage power supply unless otherwise specified.
Pin Connection Diagram (Front View)
10 Input 9 (+) VCC 8 Direct Output 7 Internal Series Resistor Output 6 180pF Cap to Pin9 (Feedback) 5 180pF Cap to Pin2 (Feedback) 4 Internal Series Resistor Output 3 Direct Output 2 (-) VCC 1 Input
2.335 (59.3) 2.050 (52.0) .276 (7.0)
1.260 (32.0)
1
10 .550 (13.97) .157 (3.9) 1.417 (35.6) 1.770 (45.0)
|
